Skip to content
Baobab QR

All guides

Business card QR codes

A QR code on your business card that saves your details to a phone: contact card or link, where it fits, how big to print it, and what to test.

Free, and your code appears as you type.

What the code opens
What your code holds

Your QR code appears here.

Free account to download: email and password, no card.

Print it at least 2 cm wide for every 20 cm of scanning distance. A menu read at arm's length needs about 3 cm.

Before you print: on Free, where a code goes can't change once it's saved. On Plus and Pro it can, even after printing.

Design
Change design

This is our free contact card QR code generator, set up with the label “Scan to save my details” under the code. Change any of it under Change design.

Updated 28 October 2026

A business card lives in wallets, desk drawers and car door pockets, sometimes for years, and the code on it gets scanned whenever someone finally needs you. That makes it a classic case of a printed code that simply has to keep working. Here’s how to make one that saves your details in a tap, fits the card, and still works when the card is old.

The generator above starts with the contact card tool, which suits most cards.

  • A contact card opens a small page with your name, organisation and job title, and a row for each detail you add: people tap to call, email, open your website or find your address in Google Maps. Save contact adds you to their phone as a vCard, the contact format every phone understands. Only your name is required.
  • A link, from the link tool, suits a card whose real job is to show your work: a portfolio, a booking page, or your page on a professional network.
  • A WhatsApp chat, from the WhatsApp tool, suits trades where clients would rather message than phone. A plumber in Pretoria might set the first message to “Hi, I’d like a quote”, so every chat starts with the job.

Fill in the details

Give people what they need to reach you, and nothing they don’t:

  • Write phone numbers in international form, such as +27 82 123 4567, so they dial from abroad too.
  • Add your website if you have one. We check it for safety, as we check every link.
  • Use the note for one useful line, such as your hours or the area you cover.
  • Leave out a home address unless clients come to you.

When your details change

Cards outlive job titles. On the Free plan, a contact card code always shows the details it was made with, so choose ones that will last: your own mobile number and an email address you’ll keep, rather than a switchboard or a shared inbox.

On Plus or Pro you can update the card’s details after printing, and everyone who scans it gets the new ones within a minute. On Plus, each code can change where it goes up to 10 times a month; on Pro, as often as you like. The box of 500 cards stays useful when your number changes.

Where it goes on the card

  • On the back, where there’s room for the code, its label and its short address, with your name and logo on the front.
  • Well inside the trim line. Printers cut cards from large sheets, and the cut can drift by a millimetre or two. Keep the code and its empty border at least 4 mm from every edge, so the blade never clips the border.
  • Away from folds on folded cards, and clear of any rounded corner or hole.

How big to print it

The line under your code says how big to print it: at least 2 cm wide for every 20 cm of scanning distance, more for a dense code. A contact card code holds a short address rather than your details, so it stays simple, and a card is held about 20 cm from the phone: 2 cm is the least it should be. Measure the code with its empty border. The label “Scan to save my details” sits under the code and adds a few millimetres of height.

A typical card is about 85 by 55 mm, so a 2 cm code, its label and a line of small type fit on the back with room to spare. Scale up for anything you hand out alongside it: a pull-up banner at a trade show, read from about 2 metres, needs the same code at least 20 cm wide.

Paper and finish

  • Matt or uncoated card reads best. Spot gloss, foil or a metallic ink over the code throws light back at the camera; keep those for your name and logo.
  • Dark on light. Print the code dark on white or a pale colour. The design panel won’t accept colours too close for phone cameras to tell apart.
  • Watch textured stock. Linen or felt-finish card can break up small dots, so ask your printer for a proof on the real paper.

Test before the full run

  1. Download the code and send that file to your printer: the SVG and PDF stay sharp at any size. Never send a screenshot of the preview, which opens our “isn’t working yet” page rather than your card.
  2. Scan the printed proof on two phones, ideally an iPhone and an Android.
  3. Tap Save contact and check every detail: the numbers dial, the email opens and the website loads.

Keep it trustworthy

Print the code’s short address beside it in small type, for example baobabcode.app/4M8TD2C, so anyone can check it against what their camera shows. We check every link before your code goes live, again the next day, and every month, and anyone can report a code. We don’t store IP addresses or use cookies when someone scans a code.

Because cards sit in drawers, what happens later matters most of all: your codes keep working even if you stop paying, with no scan limits, under the Baobab Pledge.

Mistakes to avoid

  • A code under 2 cm wide, or one whose border the trim cut into.
  • Details that belong to a job you might leave, on a Free code.
  • Foil, spot gloss or metallic ink across the code.
  • A screenshot of the preview sent to the printer instead of the downloaded file.

Frequently asked questions

What happens when someone scans the code on my card?

Their phone opens a simple page with your name, organisation and job title, and a row for each detail you added, which they can tap to call, email, visit your website or find your address on a map. Save contact adds you to their phone's contacts.

Can I update my details after the cards are printed?

On Plus or Pro, yes: change them on the code's page, and everyone who scans a card sees the new ones within a minute. On Plus, each code can change where it goes up to 10 times a month; on Pro, as often as you like. A Free code always shows the details it was made with.

How big should the code be on a card?

At least 2 cm wide. The line under your code asks for 2 cm for every 20 cm of scanning distance, and a card is held about 20 cm from the phone. Measure the code with its empty border; the label sits under it.

Will the code on an old card still work?

That's what the Baobab Pledge is for. Your codes keep working whether or not you pay, with no limit on scans, and if we ever close we'll tell you at least 12 months ahead and keep codes working for at least five years after that. Only you can pause or delete a code, and a code that breaks our Acceptable Use Policy is blocked.

Ready to make your code?

Free account to download: email and password, no card.

Help articles

More ideas

Find more ideas