Updated 27 October 2026
A code on a For Sale board works while nobody’s in the office: someone walking past scans it and sees the photos, the price and how to arrange a viewing. Here’s how to make one that buyers can trust, and that you can use again when the property sells.
What to link to
On the Free plan, a code always opens the link it was made with, so choose the link with the board’s life in mind.
- The listing itself, on your agency’s website or a property portal. It’s the page a buyer wants, but a listing page may be taken down once the property sells. On Free, use a listing link only on things you throw away when it sells, such as brochures.
- One board, many listings, on Plus or Pro. Make one code for each board (Plus holds 10 codes and Pro 100), and change where it goes when the board moves to the next property. On Plus, each code can change where it goes up to 10 times a month; on Pro, as often as you like. Everyone who scans sees the change within a minute, and the board needs no new sticker.
- A page that lasts, on any plan: your agent profile, or a page listing everything you’re selling. Its address doesn’t change, so a Free code on a board stays useful from one property to the next.
- A chat with you. The WhatsApp tool makes a code that opens a WhatsApp chat with you, with a message ready, such as “Hi, I’d like to know more about the house on Oak Street.” Some buyers would rather send a message than call.
Before you print, try the link on a phone using mobile data. The photos and the price should show straight away, with no sign-in or pop-up in the way.
Where to put the code
People scan a board from the pavement, so put the code where someone on foot can stop, stand still and point a phone at it:
- On a sign rider or a small panel at eye level, by the gate or low on the post, rather than at the top of a tall board.
- On show-day boards, where visitors walk up close. The label “Scan for details” says what the code opens.
- On window cards in your office, for people browsing after hours. Glass reflects, so test from where they’ll stand.
- On brochures handed out at viewings, read in the hand.
A code can’t be scanned safely from a moving car, so don’t place it for drivers.
How big to print it
The line under your code says how big to print it: at least 2 cm wide for every 20 cm of scanning distance. Boards are read from much further away than menus, so the sizes grow quickly:
| Where | Scanning distance | Code at least |
|---|---|---|
| A brochure, in the hand | About 30 cm | 3 cm |
| A window card | About 1 metre | 10 cm |
| A rider by the gate | About 1.5 metres | 15 cm |
| A board seen from the pavement | About 2 metres | 20 cm |
| A board set 3 metres back | About 3 metres | 30 cm |
If a board stands further back than that, add a small sign with the code nearer the pavement, rather than a huge code nobody can get close to. These sizes are for the code and its empty border; in a frame, they’re for the code inside.
Materials that last outdoors
Boards stand in sun and rain for weeks at a time. Ask your sign maker for:
- Weatherproof boards and riders, such as corrugated plastic or aluminium composite, rather than paper in a plastic sleeve.
- Fade-resistant (UV-resistant) inks or vinyl. A code whose dark parts fade towards its light parts is harder for phones to read.
- A matt finish. Gloss or a clear cover can throw sunlight across the code.
- Dark on light. Keep the code dark on a white or light background, with its empty border. Don’t print it light on a dark board.
Print the code into the board or rider itself, not on a sticker that can peel off or be covered.
Test before you print
- Download the file first and scan it on your screen. The preview before a download holds a stand-in address, which opens our “isn’t working yet” page rather than your listing.
- Print it full size on paper, tape it where the board or rider will go, and scan it from the pavement in daylight on two phones, ideally one iPhone and one Android.
- Make sure the listing loads quickly over mobile data.
Then send the file to your sign maker. The SVG and PDF downloads stay sharp at any size.
Know which boards work
Name each code after its board, such as Board 4 or Oak Street rider. Free shows each code’s total scans. Plus adds the last 30 days and Pro the full history, with scans by day, the phones used and, from 10 scans in the period, each board’s busiest hours and weekdays.
If your website has its own analytics, make the code in your account and turn on Add campaign tags: your analytics can then count visits from the code. For a set of matching board codes, make one, then press Duplicate on its page; the new code starts with its link and design.
Keep it trustworthy
We check every link before your code goes live, again the next day, and every month. When you change where a code goes, we check the new link first. Print the code’s short address beside it, for example baobabqr.app/7K2XQ9P, so buyers can check that it matches what their camera shows, and look at your boards now and then for anything stuck on top. Anyone can report a code.
If you stop paying, your codes keep working, as the Baobab Pledge promises: each one goes on opening wherever it last pointed, but you can’t change it until you subscribe again. Before a plan ends, point boards that will stay up at a page that lasts.
Mistakes to avoid
- A Free code on a board that opens one listing: once the listing comes down, every scan ends on an error page.
- Codes printed too small to read from the pavement, or placed high on a tall board.
- A glossy cover over the code, or a code printed light on dark.
- A board moved to a new property while its code still opens the old listing.